Wood grips for BERSA pistols

---

Thunder 380

Thunder 380 grips fit Bersa Firestorm .22 or .32 pistols.

Thin model

Made for ambidextrous use.
Bersa Thunder 380 thin grips. Ambidextrous use. Set price is $76USD.
Comes with a set of washers. Can be mounted with existing screws.

Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Flat model

Similar in thickness to the factory plastic grips.
Bersa Thunder 380 wood grips. Set price is $76USD.
Comes with a set of washers. Can be mounted with existing screws.

Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thumb rest grips

Available in right or left handed configuration.
Bersa Thunder 380 thumb rest grips. Set price is $80USD.
Comes with a set of washers. Can be mounted with existing screws.

Side	Right handed Left handed
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Ambidextrous finger grips

Without thumb rest. Bersa Thunder 380 grips. Ambidextrous finger grips. Set price is $80USD.
Comes with a set of washers. Can be mounted with existing screws.

Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thumb rest and finger cuts model. Available in right or left handed configuration

Bersa Thunder 380 grips. Thumb rest and finger cuts model. Set price is $80USD.
Comes with a set of washers. Can be mounted with existing screws.

Side	Right handed Left handed
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Magazine extended finger cuts with palm swell

The grips are longer and cover the magazine floor plate.
Bersa Thunder 380 magazine-extended grips with palm swell.
Set price is $80USD.
Comes with a set of washers. Can be mounted with existing screws.

Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Magazine extended finger cuts w/wo thumb rest

The grips are longer and cover the magazine floor plate.
Available in right-handed, left-handed or ambidextrous configuration.
The ambidextrous model from the Side selection does not have a thumb rest.
Bersa Thunder 380 finger grips with or without thumb rest. Magazine-extended model.
Set price is $87USD.
Comes with a set of washers. Can be mounted with existing screws.

Side	Right handed Left handed Ambidextrous
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Front wrap finger grips

Ambidextrous use.
Bersa Thunder 380 front wrap grips. Ambidextrous use. Set price is $85USD.
Comes with a set of washers. Can be mounted with existing screws.

Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thunder 380 CC

Thin model

Ambidextrous grips
Thin model, right-handed use
Thin model, left-handed use
Bersa 380 CC Thin model. Set price is $76USD.
Comes with a pair of washers. Can be mounted with existing screws.

Side	Right handed Left handed Ambidextrous
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Ambidextrous finger grips

Bersa 380 CC ambidextrous finger grips. Set price is $80USD.
Comes with a pair of washers. Can be mounted with existing screws.

Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thumb rest and finger cuts model

Thumb rest and finger cuts model.
Available in right-handed or left-handed configuration.
Bersa 380 CC finger grips with or without thumb rest. Set price is $80USD.
Comes with a pair of washers. Can be mounted with existing screws.

Side	Right handed Left handed
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Magazine-extended model

The grips are longer and cover the magazine floor plate. Bersa .380 CC finger grips with or without thumb rest. Magazine-extended model.
Set price is $87USD.
Comes with a pair of washers. Can be mounted with existing screws.

Side	Right handed Left handed Ambidextrous
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thunder 380 PLUS

Flat grips

Bersa Thunder 380 PLUS grips. Flat grips. Set price is $73USD.
Can be mounted with existing screws.

Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thumb rest grips

Available in right or left handed configuration.
Bersa Thunder 380 PLUS with thumb rest. Set price is $80USD.
Can be mounted with existing screws.

Side	Right handed Left handed
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Ambidextrous finger grips

Bersa Thunder 380 PLUS ambidextrous finger grips. Set price is $80USD.
Can be mounted with existing screws.

Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thumb rest and finger cuts grips

Avialable in right or left handed configuration.
Bersa Thunder 380 PLUS finger grips with thumb rest. Set price is $86USD.
Can be mounted with existing screws.

Side	Right handed Left handed
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

MOD 85

Available models:

• Flat. Price is $73USD.
Can be mounted with existing screws.


Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

• Thumb rest grips. Set price is $80USD.
Can be mounted with existing screws.



Side	Right handed Left handed
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

• Ambidextrous finger grips. Set price is $80USD.
Can be mounted with existing screws.


Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

• Finger grips with thumb rest. Set price is $86USD.
Can be mounted with existing screws.


Side	Right handed Left handed
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

UC 9/40

Regular grips

> BERSA UC9/40 wood grips. Set price is $92USD.
Comes with a screw set.
Mounting instructions can be found here.

Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thumb rest grips

Available in right or left handed configuration.
BERSA UC9/40 wood grips with thumb rest. Set price is $98USD.
Comes with a screw set.
Mounting instructions can be found here.

Side	Right handed Left handed
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thumb rest and finger cuts grips

Available in right or left handed configuration.
This set was mounted on a Firestorm 45 MINI frame. BERSA UC9/40 wood grips with thumb rest and finger cuts. Set price is $98USD.
The ambidextrous finger cuts variant does not have a thumb rest.
Comes with a screw set.
Mounting instructions can be found here.

Side	Right handed Left handed
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

HC 9/40

Regular grips

Pictures to be added here...
BERSA HC9/40 wood grips. Set price is $92USD.
Comes with a screw set.
Mounting instructions can be found here.

Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thumb rest grips

Available in right or left handed configuration.
BERSA HC9/40 wood grips with thumb rest. Set price is $98USD.
Comes with a screw set.
Mounting instructions can be found here.

Side	Right handed Left handed
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thumb rest and finger cuts grips

Available in right or left handed configuration.
Pictures to be added here...
BERSA HC9/40 wood grips with thumb rest and finger cuts. Set price is $98USD.
The ambidextrous finger cuts variant does not have a thumb rest.
Comes with a screw set.
Mounting instructions can be found here.

Side	Right handed Left handed
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Firestorm 45 MINI and BERSA UC 45

Regular grips

Regular grips with beaver tail extension.
This is not the actual model you can buy! The regular model does not have the beaver tail extension. BERSA Firestorm 45 MINI / UC45 wood grips. Set price is $92USD.
Comes with a screw set.
Mounting instructions can be found here.

Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thumb rest grips

Available in right or left handed configuration.
BERSA Firestorm 45 MINI / UC45 wood grips with thumb rest. Set price is $98USD.
Comes with a screw set.
Mounting instructions can be found here.

Side	Right handed Left handed
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Thumb rest and finger cuts grips

Available in right or left handed configuration.
Ambidextrous finger grips
Thumb rest grips with finger cuts.

BERSA Firestorm 45 MINI / UC45 wood grips with thumb rest and finger cuts. Set price is $98USD.
The ambidextrous finger cuts variant does not have a thumb rest.
Comes with a screw set.
Mounting instructions can be found here.

Side	Right handed Left handed Ambidextrous
Wood	Walnut Wattle Ash Maple Alder ($10) Sapele ($10) Zebrawood
Finish	Oil Red Shellac Clear Shellac Gray stained Black stained Unfinished
Texture	Checkered Smooth

---

Mounting instructions for BERSA UC, HC and Firestorm double stack grips series.

Make sure the pistol is unloaded.

Check if they fit the frame properly. Do it side by side.
Do NOT force the grips while installing them!
All grips were mounted on a frame and the fit was excellent. They do NOT need additional modification. Using more force than required or using wrong mounting technique will lead to crack!

Slots inside the grips	Ledges at the tang

To remove the existing grip please see the manual or ask a trained person.

Let's start installing the grips. Make sure the pistol is unloaded!

1. Align the tang of the grip to the frame.
2. Push/rotate the grip half into place.
Push it to the front and a little upward. It needs bit of pressure.
3. Check if the grip contacts the frame properly.
A hairline gap between the frame and grip is acceptable.

The same goes for the other side.
4. Align the tang of the grip to the frame.
5. Push/rotate the grip half into place.
Push it to the front and a little upward. It needs bit of pressure.
6. Check if the grip contacts the frame properly.
A hairline gap between the frame and grip is acceptable.
7. If both sides are looking good then mount both grips on the pistol.
8. The bottom of the grips are flushed with the frame.
9. The front edges must follow the frame.
10. Through the hole at the bottom of the grips, push and rotate the grip catch into its lower (grip locked) position. Hold the grips tight with your hand while doing this.
11. Install the screw to keep the two grip halves together.
Do NOT overtight the screw otherwise you will have the nut torn out of the grip! Use screwfix adhesive to avoid overtightening!
12. The grips are on and fixed in place. Please check fuinctionality before using the gun.

Thank you so much for your interest and support.

MARSCHALGRIPS.COM & MARSCHALGRIPS.NET Ⓒ 2007-2024 Marschalko Gusztav, Denes